Sony DCR-DVD505 - Manual (Page 47)

47
R
e
cor
d
in
g/Playba
ck
• You cannot change the zoom speed with the zoom
buttons 9 on the LCD frame.
To play back a series of
still images (Slide show) ........... qk
Touch on the still image playback
screen.
The slide show begins from the selected
image.
Touch
to stop the slide show. To restart,
touch again.
• You can touch to set continuous slide show
playback. The default setting is [ON] (continuous
playback).
• You cannot operate playback zoom during slide
show.
To check the remaining battery .... ql
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO ql. If you press this
button once, BATTERY INFO appears on the
screen for about 7 seconds. Press the button
while BATTERY INFO appears on the screen
to extend the indication to the 20-second
maximum.
To turn off the operation confirmation
beep .................................... qk
See [BEEP] on page 80.
To initialize the settings (RESET)
.......................................... w;
Press RESET w; to initialize all the settings,
including settings for date and time. (Setup
items customized on Personal Menu are not
initialized.)
Other part names and functions
5 Built-in 4ch microphone
When an external microphone (optional) is
connected, it takes precedence over the internal
microphone (p.98).
qf Remote sensor
Point the Remote Commander (p.51) towards
the remote sensor to operate your camcorder.
qg Recording lamp
The recording lamp lights up in red during
recording (p.80).
The lamp flashes when the remaining capacity
for the battery or disc is running low.
qh Speaker
Sounds come out from the speaker while
playing back.
• For how to adjust the volume, see page 43.
Recording/playback
81
85
Recording
capacity (approx.)
Remaining battery
(approx.)