Sony HDR-CX560V - Manual (Page 28)


US

Press PHOTO lightly to adjust the focus, then press it fully.
Tips
See page 68 on the recordable number of photos.
To change the image size, touch (MENU)  [Image Quality/Size]  [ Image Size] 
a desired setting  .
You cannot record photos while is displayed.
Your camcorder flashes automatically when there is insufficient ambient light. The flash does not work in
the movie recording mode. You can change how your camcorder flashes by (MENU)  [Camera/
Mic]  [ (Flash)]  [Flash]  a desired setting  .
If white circular spots appear on photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camcorder’s flash, they appear as white circular spots.
To reduce the white circular spots, light the room and shoot the subject without a flash.
Acquiring location information using the GPS (HDR-CX560V/CX700V)
When you set [GPS Setting] (p. 61) to [On], appears on the LCD screen, and your
camcorder starts searching for the GPS satellites and acquires the location information.
Acquiring the location information enables you to use functions such as the Map View.
The indicator changes according to the strength of GPS signal reception.
Processing time can be shortened when you load the GPS assist data into the camcorder using the
supplied software “PMB.” Install “PMB” on your computer (p. 40) and connect the computer to the
internet. Then connect the camcorder to the computer and the GPS assist data will be automatically
updated.
The GPS assist data may not function in the following cases:
When the GPS assist data are not updated for about 30 days or more
When the date and time of the camcorder are not correctly set
When the camcorder is moved for a long distance
Built-in map is powered by companies as follows; Map of Japan by ZENRIN CO., LTD., other areas
by NAVTEQ.











Particles (dust, pollen,
etc.) in the air