One touch recording (dv full dubbing) – Sony VRD-MC1 User Manual
Page 17
VRD-MC1
2-661-941-02 (1)
masterpage:Right
17
G:\#sagyou\Sony\01 TV\836599S VRD-MC1\0119 VRD-MC1i\0119 VRD-MC1 kai nou-
hin\2661941011\2661941011\2661941011 VRD-MC1\GB05OPE1.fm
Usi
ng DVDi
re
ct wit
hou
t a Co
mput
er
One Touch Recording (DV Full Dubbing)
Note
Before you start recording, change the [DV Full Dubbing setting] to [ON] in the Setup menu.
(
1
Connect the supplied power cord and AC adaptor to DVDirect.
2
Connect your digital video camera
*
to DVDirect with a DV
(i.LINK) cable (not supplied).
* DV or Digital8 camcorder only. MICROMV camcorder is not supported.
3
Turn on the digital video camera and ready it for playback.
Hint
For most digital video cameras, switch the power/mode button to the playback or “VTR”
mode to play the tape or perform dubbing.
4
Set the mode switch on the left side of DVDirect to
[STANDALONE].
DV IN
DV (i.LINK) cable
Signal flow
STANDALONE
PC/PRINT
. Continued
GB01COV1.book Page 17 Thursday, January 19, 2006 7:25 PM