Audiovox AVR-1228 - Manual (Page 19)

6 Press MENU to save the settings and exit from the
Time and Date Set menu.
7 Press MENU repetedly to exit the menu system and
return to normal viewing.
Selecting cable or antenna viewing
You must set the viewing mode for your VCR, choosing
either CABLE (cable system connection) or ANTENNA
(antenna connection). Make your selection based upon
how you connected your television (UHF/VHF antenna
connection). To set the viewing mode:
1 Press MENU to display the menu.
2 Press 3 to select Channel Set.
3 Press 3 to toggle the setting between CABLE and
ANTENNA. When the viewing mode desired is
displayed, press MENU twice to exit.
Programming the channel memory
The VCR’s channel memory determines the channels that
are visible when you press –CH/TRK+. You can add or
remove channels from memory.
Setting channels automatically (Auto Channel Search)
Make sure that you use the auto channel search feature
during daytime broadcast hours. If you use the auto
channel search feature late at night, you may eliminate
channels that air only daytime programming.
1 Press MENU to display the main menu.
CHANNEL SET
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type : ANTENNA
Press MENU to exit
CHANNEL SET
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type : CABLE
Press MENU to exit
Setting up your VCR,
continued
AUDIOVOX Video Cassette Recorder User’s Guide 14
✔
• Channel memory is not
affected by power out-
ages.
• You will only need to
reprogram the memory if
you change the type of
cable or antenna connect-
ed to your TV.
DV -K286N-SJ (AUDIOVOX) 98.5.4. 99.12.10 10:9 AM ˘ ` 14