Sony MZ-NF610 - Manual (Page 38)

38
Adjusting treble or bass
(Digital Sound Preset)
You can adjust the treble and bass to suit
your taste. The player can store two sets
of treble-bass adjustments, which can
then be selected later during playback.
Selecting the sound quality
Factory settings
Factory settings of the Digital Sound
Preset are as follows:
• “SOUND1”: bass +1, treble ±0
• “SOUND2”: bass +3, treble ±0
1
Press SOUND repeatedly to select
“SOUND1” or “SOUND2” in the
display.
To cancel Digital Sound Preset
Select “OFF” in step 1.
Adjusting the sound quality
You can change the preset sound quality
and store the results in “SOUND1” or
“SOUND2”.
1
Press SOUND repeatedly to select
“SOUND1” or “SOUND2”.
2
During playback, press SOUND for 2
seconds or more.
The recorder changes to B (bass)
setting mode. Pressing jog lever
changes the recorder to T (treble)
setting mode.
3
Slide the jog lever repeatedly to
adjust the level.
To switch “B” (bass) and “T”
(treble):
Press the jog lever.
To switch “SOUND1” and
“SOUND2”:
Press SOUND.
Jog lever
SOUND
When you select bass-setting mode,
“B” appears. When you select treble
setting mode, “T” appears.
Example: While adjusting the bass
The cursor moves.
(Position: –2)
–4 ±0 +3
The sound can be adjusted in 8 steps
(–4, –3, ...±0, ...+2, +3).