Sony HDR-TD30V User Manual
Page 74
highlight scenes.
[Playback Range]: You can set the playback range (starting and ending date) of the Highlight
Playback.
[Theme]: You can select a theme for Highlight Playback.
[Music]: You can select music.
[Audio mix]: The original sound is played back with the music.
[Length]: You can set the length of the Highlight Playback segment.
[Highlight Point]: You can set the points in a movie or photo that will be used in a Highlight Playback.
Play the desired movie, and select
. Or play the desired photo and select
.
appears on the movie or photo that is used in a Highlight Playback.
To erase the points, select
[Clear All Points].
Notes
Highlight Playback scenes will change each time you select a Highlight Playback.
The [Playback Range] setting is cleared when the Highlight Playback stops.
After the music file is transferred to the camcorder, if you cannot play the music, the music file may
be damaged. Delete the music file by selecting
[Setup]
[
Playback Settings]
[Empty Music], then transfer the music file again. You can restore the music data recorded on your
camcorder at the default using “Music Transfer.” For operating instructions, see “Music Transfer”
help.
If the Highlight Playback function was started from the Map View, [Highlight Point] cannot be set.
However, if the Highlight Playback function was started from the Event View screen and you set the
[Highlight Point], the point can take effect on the Map View also (HDR-TD30V).
The audio used for the Highlight Playback will be converted to 2ch stereo.
When you connect the camcorder to an external device, such as a TV, and watch Highlight
Playback, these images do not appear on the LCD screen of the camcorder.
Copyright 2013 Sony Corporation
74