Adder Technology SmartView - Manual (Page 6)











5






Installation
Locations
Please consider the following important points when planning the position of
the Adder SmartView Multiscreen Serial unit:
• Situate the Adder unit close to the systems to which it will be connected.
The Adder unit does not require a power supply providing that its
connection cables are no longer than 2 metres.
• Thanks to the remote control, the Adder unit can be situated out of sight
behind a desk or adjacent to the systems.
• Consult the precautions listed within the Safety.information section.
SECT 3
Mounting
Before you begin connecting to the keyboard, mouse and source systems, it is
advisable to mount the unit in place, either:
• On a horizontal surface using the supplied self adhesive feet, or
• Amongst the cabling at the rear of the desk.