Sony DCR-HC48 - Manual (Page 14)

14
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
You can check the remaining battery charge
on the LCD screen.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Notes
• All times measured under the following
conditions:
Top: When the LCD backlight turns on.
Middle: When the LCD backlight turns off.
Bottom: Recording with viewfinder while the
LCD panel closed.
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
Indicator Status
Sufficient power remaining
Battery low, recording/
playback will stop soon.
Replace the battery with a
fully charged one, or charge
the battery.
DISP/BATT INFO button
99
90
Remaining battery (approx.)
Recording capacity (approx.)
Battery pack Charging time
NP-FH40 (supplied) 125
NP-FH50 135
NP-FH70 170
NP-FH100 390
Battery pack
Continuous
recording
time Typical
recording
time*
NP-FH40
(supplied) 100
110
110 50
55
55
NP-FH50 115
130
130 55
65
65
NP-FH70 245
280
280 120
140
140
NP-FH100 565
635
635 280
315
315
Battery pack
LCD panel
opened* LCD panel
closed
NP-FH40
(supplied)
120 150
NP-FH50 140 170
Step 2: Charging the battery pack (Continued)