Shutter priority, Help guide – Sony ILCE-7K User Manual
Page 145
Interchangeable Lens Digital Camera
ILCE-7/ILCE-7R
Shutter Priority
You can express the movement of a moving subject in various ways by adjusting the shutter speed, for
example, at the instant of the movement with high speed shutter, or as a trailing image with low speed shutter.
The shutter speed can be changed while recording movies.
1. Set the mode dial to S (Shutter Priority).
2. Select the desired value by turning the front dial.
3. Adjust the focus and shoot the subject.
The aperture is automatically adjusted to obtain proper exposure.
Note
If proper exposure cannot be obtained after setup, the aperture value on the shooting screen blinks.
Although you can shoot as it is, resetting is recommended.
Use a tripod to prevent blurring when you use a slow shutter speed.
The
/
(SteadyShot warning) indicator does not appear in shutter speed priority mode.
When the shutter speed is 1 second(s) or longer, noise reduction will be done after shooting for the same
amount of time that the shutter was open. However, you cannot shoot any more while noise reduction is in
progress.
The brightness of the image on the monitor may differ from the actual image being shot.
Hint
When a faster shutter speed is used, moving subjects, such as a running person, cars, or sea spray appear
as if they are stopped. When a slower shutter speed is used, a trailing image of the movement of the subject
is captured to create a more natural and dynamic image.
Related Topic
Long Exposure NR (still image)
4-484-060-11(1)
Copyright 2013 Sony Corporation
How to Use
136