Sony SDM-S81R - Manual (Page 8)

8
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
Step 3: Secure the cords and close
the back cover
1 Remove the cable holder.
2 Secure the cables and cords with the cable holder.
To close the back cover securely, bundle the cables and cords
as illustrated.
3 Close the back cover.
Bandle the cables and cords
You can bandle the cables and cords by using the supplied cord
strap.
OPEN
This illustration of monitor rear is the SDM-S51R.
The same applies for the SDM-S71R/S81R model.
to AC IN
to a power outlet
power cord (supplied)
Cable holder
Illustrations of monitor rear are the SDM-S51R.
The same applies for the SDM-S71R/S81R model.
Cable
holder
Cord strap