Viewing still images, Cyber-shot user guide – Sony DSC-TX200V User Manual
Page 76
Search
Top page > Viewing > Viewing still images > Viewing still images
Viewing still images
1. Touch
(Playback) to switch to playback mode.
2. Select an image with / .
Taking advantage of dragging operations
You can perform the following actions by dragging the screen during playback.
Displays the next/previous image
In playback mode, drag the screen to the right or left. To change images continuously, drag the screen
to the right or left and keep touching the screen.
Viewing images taken with a different camera
This camera creates an Image Database File on the memory card for recording and playing images. If
the camera detects images not registered in the Image Database File on the memory card, a
registration screen with the message “An image that is not administered in this device has been found.
Import?” will be displayed. To view unregistered images, register them by selecting [OK].
Use a sufficiently charged battery to register images. If a battery with a low charge is used to
register images, it may not be possible to register all of the data or the data may be corrupted if the
battery charge runs out.
Viewing vertical images in full-screen display (DSC-TX200V only)
If the camera is rotated, the horizontal or vertical orientation of the image is determined and the image
being played back is automatically rotated.
76