Zoom, Full1 (when the pc signal is input), Full2 (when the pc signal is input) – Sony VPL-VW40 User Manual

Page 30

Advertising
background image

30

You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the Screen

menu only when “Zoom” is selected. (

1 page 45)

Notes on selecting the wide screen mode

The projector is featured with the WIDE MODE. When changing the settings of WIDE
MODE, use caution as described below.
• Select the wide screen mode taking into account that changing the aspect ratio of the

original picture will provide a different look from that of the original image.

• Note that if the projector is used for profit or for public viewing, modifying the original

picture by switching to the wide mode may constitute an infringement of the rights of
authors or producers, which are legally protected.

Zoom

A normal 16:9 aspect ratio picture is
enlarged vertically and horizontally in the
same ratio to fill the screen. Use this mode
to view a letterbox picture or a letterbox
picture with side panels.
If the subtitle of a movie, etc. is hidden
and cannot be seen, adjust the screen with
“Vertical Size” and “V Center” to display
the subtitle. (

1 page 45)

Full1 (When the PC signal is
input)

Displays a picture on the whole of the
screen without changing the aspect ratio
of the original picture.

Full2 (When the PC signal is
input)

Displays a picture on the whole of the
screen.

Note

Letterbox picture

Letterbox picture with side panels

Advertising