Sony DVP-NS500V - Manual (Page 20)

20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select one of the following connections, through .
z To enjoy SACD Multi or 96kHz/24bit sound, use the connection .
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide
patents issues and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights reserved.
Select a connection
Connection Components to be connected
(page 21) TV (stereo)
(page 22) AV amplifier (receiver) having 5.1ch input jacks
•
4 speakers
(front L and R, rear L and R)
•
6 speakers
(front L and R, center, rear L and R, subwoofer)
(page 22) AV amplifier (receiver) having a Dolby
*
Digital or DTS
**
decoder and a digital
input jack
•
6 speakers
(front L and R, center, rear L and R, subwoofer)
(page 24) Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
•
2 speakers
(front L and R)
(page 24) MD deck/DAT deck
(page 25) AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
•
3 speakers
(front L and R, and rear (monaural))
•
6 speakers
(front L and R, center, rear L and R, subwoofer)
A D
A
B
B
C
C
D
B