Sony VPL-HS51A - Manual (Page 24)

24
Projecting the Picture on the Screen
4
Press INPUT repeatedly to select the input you want to project
on the screen.
Display the indication of the input you want.
Example: To view the picture from the video equipment connected to the
VIDEO INPUT jack.
* Set the “Input-A Signal Sel.” setting in the Setup menu according to the
signal input. When you set it to “Auto,” and cannot display the picture properly,
select an appropriate signal with “Input-A Signal Sel.” (
1 page 42)
Tip
When “Auto Input Search” is set to “On” in the Function
menu, the channel
of the input signal is automatically displayed by pressing the INPUT button.
5
Turn the zoom ring to adjust the size of the picture.
Video INPUT
To view the picture from Press INPUT to
display
Video equipment connected to the VIDEO INPUT
connector Video
Video equipment connected to S VIDEO INPUT connector S-Video
Component equipment connected to Y / P B /C B / P R /C R on
the projector
Component
RGB/component equipment connected to the INPUT A
connector Input-A*
Equipment connected to the HDMI connector HDMI
Zoom ring