Sony VBD-MA1 - Manual (Page 58)

58
3 Press V or v to select [Yes] and press
the ENTER button.
This unit starts finalizing the disc.
When the message [Completed.]
appears, finalizing has completed.
b Note
• It takes a few minutes to finalize a disc.
Depending on the contents of a disc, finalizing
may take time.
You can erase all content recorded on a
DVD+RW, DVD-RW or BD-RE disc. The
erased disc is reusable as a blank disc.
b Note
• Be aware that this operation erases all data.
1 Insert a disc to erase, press V or v to
select [Erase disc], and press the
ENTER button.
The message [Erase the disc?] appears.
2 Press V or v to select [Yes] and press
the ENTER button.
The message [All content will be
erased. Continue?] appears.
3 Press V or v to select [Yes] and press
the ENTER button.
This unit starts erasing the disc.
When the message [Completed.]
appears, erasing has completed.
You can prevent a BD-R disc from further
recording or editing. Once a BD-R disc is
closed, you cannot add videos or photos.
Refer to the screen message.
You can check the system software version
of this unit.
To reset all setup items, select [Reset
settings] and press the ENTER button. The
message [Reset to the default settings?]
appears. Select [Yes] and press the ENTER
button. The setting reverts back to the
factory default and [Completed] is
displayed.
z Hints
• The system software is the built-in software that
makes this unit work.
• Selecting [Reset settings] clears the recording
history necessary for copying only new contents
and resets the customized settings.
This unit is automatically turned off when
no button operation is made for more than 2
hours.
OFF
The unit is not automatically turned off.
Erase disc
Close BD-R
System Info
Auto Shut Off
BD