Sony KV-36XBR450 - Manual (Page 58)

Other Information
50
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedures to
program the remote control.
1 Check the list of the “Manufacturer’s Codes” listed on page 52,
and find the three-digit code number for the manufacturer’s code
for your equipment. (If more than one code number is listed, start
with the number listed first.)
2 Open the cover of the remote control and move the slide switch
to the desired equipment type.
3 Press CODE SET and close the cover of the remote control.
4 Enter the three-digit manufacturer’s code number.
5 Press ENTER.
6 To check if the code number works, aim the TV’s remote control
at the equipment and press the green POWER button that
corresponds with that equipment. If it responds, you are done. If
not, try using another code listed for that manufacturer.
Sony
Equipment Switch Position
on Remote Control Programmable
Code Number
Beta, ED Beta VCRs AV1 303
8 mm VCR AV2 302
VHS VCR AV3 301
DVD Player DVD 751
✍
The equipment must have infrared (IR) remote capability in order to be used
with the remote control.
✍
You must do step 4 within 10 seconds of step 3, or you must redo steps 2
and 3.
3
2
4
5
DRC/CINEMOTION
HOME THEATER CONTROL
DRC/CINEMOTION