Sony DSC-W130 - Manual (Page 48)

48
Shooting menu For details on the operation 1 page 43
Selects whether the camera performs continuous shooting or not when you press the shutter button.
(The Exposure Bracket settings are for the DSC-W130 only)
On the Burst
• When recording with the self-timer, a series of a maximum of five images is recorded.
• The recording interval is approximately 0.5 seconds (DSC-W130) or 0.7 seconds (DSC-W110/W115/
W120/W125). The recording interval becomes longer, depending on the setting for the image size.
• When the battery level is low, or when the internal memory or “Memory Stick Duo” is full, the Burst
stops.
• The focus, white balance, and exposure are fixed to the values set for the first shot.
On the Exposure Bracket (DSC-W130 only)
• The focus and white balance are adjusted for the first image, and these settings are also used for the other
images.
• When you adjust the exposure manually (page 49), the exposure is shifted based on the adjusted
brightness.
• The recording interval is the same as that for Burst mode, but becomes slower depending on the shooting
conditions.
• If the subject is too bright or too dark, you may not be able to shoot properly with the selected bracket step
value.
REC Mode: Selecting the continuous shooting method
(Normal) Does not shoot continuously.
(Burst) Records 100 images in succession when you press and hold
down the shutter button.
• The flash is set to (Flash forced off).
BRK ±0.3EV Records a series of three images with the exposure values
automatically shifted (Exposure Bracket).
The larger the bracket step value, the larger the shift of the
exposure value.
• When you cannot decide the correct exposure, shoot in the
Exposure Bracket mode, shifting the exposure value. You can
select the image with the best exposure afterward.
• When the mode dial is set to , the Exposure Bracket mode is
not available.
• The flash is set to (Flash forced off).
BRK ±0.7EV
BRK ±1.0EV