Sony PEG-S320 - Manual (Page 31)

31
Setting up your Sony CLIE Handheld–Basics
Chapter 2
6
Click Next.
The Setup Type window is displayed.
7
Select the setup type (Typical or Custom) and the
destination folder.
If you wish to synchronize multiple CLIE handhelds, follow the
steps below:
1 S elect Custom for the setup type and click next.
2 On the select components screen, make sure that USB Switcher
is selected.
3 Follow the instructions onscreen until setup is complete.
When the installation is finished, the Sony CLIE Registration screen
and the Install Tool dialog box appear.
8
Fill in the customer registration following the
instructions shown onscreen.
You need Internet access for the online customer registration.
You can take advantage of Sony’s commitment to quality customer
support and nine months of the extended limited warranty for a
total of 12 months from the original date of purchase when you
register your CLIE handheld.
9
Fill in the user name in the Install Tool dialog box,
confirm the contents, and then close the dialog box.
The applications listed in the box will be installed on your CLIE
handheld when you perform a HotSync operation for the first time
on page 33-35. If there are applications you do not want to install,
delete the applications in the list box.
Continued on next page