Sony NW-E407 - Manual (Page 13)

13
Basic Operations
On the remaining battery indication
The battery icon in the display changes as shown below.
The battery power gets low as shown in the battery icon. If “LOW BATTERY” is displayed, you cannot play
back with the Network Walkman. In this case, charge the battery by connecting to your computer.
Notes
• Charge the battery in an ambient temperature of between 5 to 35ºC (67 to 95ºF).
• The icon above “USB Connect” in the display is animated while your Network Walkman accesses the
computer. Do not disconnect the USB cable when the icon is moving or the data being transferred may be
destroyed.
• Use of your Network Walkman with a USB hub or a USB extension cable is not guaranteed. Always connect
your Network Walkman to the computer directly using the dedicated USB cable.
• Some USB devices connected to the computer may interfere with the proper operation of your Network
Walkman.
• The control buttons on your Network Walkman are all disabled while it is connected to a computer.
• You can display the data stored in the built-in flash memory using Windows Explorer when your Network
Walkman is connected to the computer.
4
Transfer audio files to your Network Walkman.
For information on transferring audio files to the built-in flash memory, refer to the
SonicStage operating instructions.
z Tip
For information on transferring audio files back to the computer, refer to the SonicStage operating instructions
or online Help for the SonicStage software.
Note
If the USB cable is disconnected while data is being transferred, unnecessary data may be left in the Network
Walkman. In this case, transfer usable audio files (including non-audio data) back to your computer and format
(page 37) the Network Walkman.