Color menu, Fine tuning the color temperature – Sony SDM-X53 User Manual
Page 16
15
GB
Adjust so that the horizontal stripes are at a minimum.
8
Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
9
Press the
m
/
M
buttons to select “PITCH” and press
the OK button.
The “PITCH” adjustment menu appears on the screen.
10 Press the
m
/
M
buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Click
[END]
on the screen to turn off the test pattern.
x
Adjust the picture’s position manually
(H CENTER /V CENTER)
If the picture is not in the center of the screen, adjust the picture’s
centering as follows.
1
Set the resolution to 1024
×
768 (SDM-X53), 1280
×
1024 (SDM-X73/X93) on the computer.
2
Load the CD-ROM.
3
Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility]
t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility]
t [Mac]/[Mac Utility].
4
Press the MENU button.
The main menu appears on the screen.
5
Press the
m
/
M
buttons to select
(SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
6
Press the
m
/
M
buttons to select “H CENTER” or “V
CENTER” and press the OK button.
The “H CENTER” adjustment menu or “V CENTER”
adjustment menu appears on the screen.
7
Press the
m
/
M
buttons to center the test pattern on
the screen.
8
Click
[END]
on the screen to turn off the test pattern.
COLOR menu
You can select the picture’s color level for the white color field
from the default color temperature settings.
Also, if necessary, you can fine tune the color temperature.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
m
/
M
buttons to select
(COLOR)
and
press the OK button.
The COLOR menu appears on the screen.
3
Press the
m
/
M
buttons to select the desired color
temperature and press the OK button.
Whites will change from a bluish hue to a reddish hue as the
temperature is lowered from 9300K to 6500K.
x
Fine tuning the color temperature
The INPUT setting is stored in memory.
SDM-X53: INPUT1 or INPUT2 (DVI-D)
SDM-X73/93: INPUT1, INPUT2 or INPUT3 (DVI-D)
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
m
/
M
buttons to select
(COLOR)
and
press the OK button.
The COLOR menu appears on the screen.
3
Press the
m
/
M
buttons to select “ADJUST” and
press the OK button.
The fine tuning menu for color temperature appears on the
screen.
4
Press the
m
/
M
buttons to select R (Red) or B (Blue)
and press the OK button. Then press the
m
/
M
buttons to adjust the color temperature and press
the OK button.
Since this adjustment changes the color temperature by
increasing or decreasing the R and B components with respect
to G (green), the G component is fixed.
5
Press the
m
/
M
buttons to select
, then press the
OK button.
The new color setting is stored in memory and automatically
recalled whenever “User” is selected.
The COLOR menu appears on the screen.
E X I T
1 2 8 0
1 0 2 4
6 0 H z
x
/
9 3 0 0 K
6 5 0 0 K
U S E R
A D J U S T
C O L O R
E X I T
5 0
5 0
5 0
1 2 8 0
1 0 2 4
6 0 H z
x
/
R
G
B
U S E R A D J U S T M E N T
(continued)