Warning indicators and messages (continued) – Sony HDR-UX5 User Manual

Page 102

Advertising
background image

102

Warning indicators and messages (Continued)

disc may enable you to use the disc on your
camcorder (DVD-RW/DVD+RW only)
(p. 62).

x

“Memory Stick Duo”

Reinsert the Memory Stick.

• Reinsert the “Memory Stick Duo” a few

times. If even then the indicator flashes, the
“Memory Stick Duo” could be damaged.
Try with another “Memory Stick Duo.”

This Memory Stick is not

formatted correctly.

• Check the format, then format the

“Memory Stick Duo” with your camcorder
if necessary (p. 63, 107).

Memory Stick folders are full.

• You cannot create folders exceeding

999MSDCF. You cannot create or delete
created folders using your camcorder.

• Format the “Memory Stick Duo” (p. 63), or

delete them using your computer.

Cannot save still picture.

• When using the Dual Rec function, do not

remove the still image recording media
from the camcorder until disc recording is
finished and still image recording is
complete (p. 36).

x

PictBridge compliant printer

Not connected to PictBridge
compatible printer.

• Switch off the printer and switch it on

again, then disconnect the USB cable and
reconnect it.

Cannot print. Check the printer.

• Switch off the printer and switch it on

again, then disconnect the USB cable and
reconnect it.

x

Others

No further selection is possible.

• You can select up to 100 images at one

time to:
– delete images
– edit the playlist
– print still images

Data protected.

• The disc has been protected with another

device.

Cannot divide.

• You cannot divided a movie that is

extremely short.

Recovering data

Avoid any

vibration.

• Your camcorder tries to recover data

automatically if the data writing was not
performed properly.

Cannot recover data on disc.

• Writing data to the disc has failed.

Attempts were made to recover the data,
but they were unsuccessful.

Please wait.

• This is displayed if the disc removal

process takes time. Turn on the camcorder
and leave it for about 10 minutes,
preventing vibration.

Advertising
This manual is related to the following products: