Sony HDR-UX5 - Manual (Page 78)

78
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 65
(OPTION MENU) t page 79
The default settings are marked with B.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you slide the POWER switch
to
(Movie).
z Tips
• The demonstration will be suspended when:
– you press START/STOP or PHOTO
– you touch the screen during the
demonstration. (The demonstration starts
again after about 10 minutes.)
– you slide the disc cover open switch.
– you remove or insert a “Memory Stick Duo.”
– you set the POWER switch to
(Still).
– you press (HOME)/ (VIEW
IMAGES).
The camera recording lamp will not light up
during recording when you set this to
[OFF]. (The default setting is [ON].)
See page 111.
DEMO MODE
REC LAMP (Recording
lamp)
CALIBRATION
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
• When you connect your camcorder to a wall
outlet, [A.SHUT OFF] is automatically set to
[NEVER].
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 121).
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
A.SHUT OFF (Auto shut
off)
REMOTE CTRL (Remote
control)