Sony DSC-RX100M3 - Manual (Page 18)

GB
18
Setting the clock
1
Press the ON/OFF (Power) button.
Date & Time setting is displayed when you turn on the camera for the first
time.
• It may take time for the power to turn on and allow operation.
2
Check that [Enter] is selected on the screen, then press
z on the control wheel.
3
Select a desired geographic location by following the
on-screen instructions, then press z.
4
Set [Daylight Savings], [Date/Time] and [Date Format],
then press z.
• When setting [Date/Time], midnight is 12:00 AM, and noon is
12:00 PM.
5
Check that [Enter] is selected, then press z.
Control wheel
ON/OFF (Power)
Select items: b / B
Set the numeric value of date and
time:
v / V / /
Set: z
Power/Charge lamp (green)