Grabación con la cámara, Camera recording, Uso de la función de zoom – Sony DCR-SC100 User Manual

Page 18: A] [b, Using the zoom feature

Advertising
background image

17

Basic operations / Operaciones básicas

Grabación con la cámara

Uso de la función de zoom

El zoom es una técnica de grabación que permite
cambiar el tamaño del sujeto en la escena.
Para que las grabaciones presenten un aspecto
más profesional, emplee la función de zoom con
moderación.
Lado “T”: para telefoto (el sujeto aparece más

cercano)

Lado “W”: para gran angular (el sujeto aparece

más lejano

Velocidad de zoom (Zoom de
velocidad variable)

Presione ligeramente el interruptor de
alimentación de zoom para obtener un zoom
relativamente lento, y presiónelo en mayor
medida para obtener un zoom de alta velocidad.

Al filmar sujetos con un zoom de telefoto
Si no obtiene un enfoque nítido mientras utiliza
el zoom de telefoto en la posición extrema,
presione el lado “W” del interruptor de
alimentación de zoom hasta obtener un enfoque
nítido. Es posible filmar sujetos que se
encuentren a una distancia de al menos 80 cm de
la superficie del objetivo en la posición de
telefoto, o de 1 cm en la posición de gran angular.

Notas sobre el zoom digital
•El zoom de más de 10x se realiza digitalmente,

y la calidad de imagen se deteriora al avanzar
hacia el lado “T”. Si no desea utilizar el zoom
digital, ajuste la función D ZOOM en OFF en el
sistema de menús.

•El lado derecho [b] del indicador de

alimentación de zoom muestra el área de zoom
digital, mientras que el izquierdo [a] muestra el
de zoom óptico. Si ajusta la función D ZOOM
en OFF, la zona [b] desaparecerá.

W

T

W

T

[a] [b]

Camera recording

Using the zoom feature

Zooming is a recording technique that lets you
change the size of the subject in the scene.
For more professional-looking recordings, use
the zoom function sparingly.
T” side: for telephoto (subject appears closer)
W” side: for wide-angle (subject appears farther

away)

Zooming speed (Variable speed
zooming)

Press the power zoom switch a little for a
relatively slow zoom; press it still more for a
high-speed zoom.

When you shoot a subject using a telephoto
zoom
If you cannot get a sharp focus while in extreme
telephoto zoom, press the “W” side of the power
zoom switch until the focus is sharp. You can
shoot a subject that is at least about 2 5/8 feet
(about 80 cm) away from the lens surface in the
telephoto position, or about 1/2 inch (about
1 cm) away in the wide-angle position.

Notes on digital zoom
•More than 10x zoom is performed digitally, and

the picture quality deteriorates as you go
toward the “T” side. If you do not want to use
the digital zoom, set the D ZOOM function to
OFF in the menu system.

•The right side [b] of the power zoom indicator

shows the digital zooming zone, and the left
side [a] shows the optical zooming zone. If you
set the D ZOOM function to OFF, the [b] zone
disappears.

T

W

W

T

W

T

Advertising