Sony BDV-N8100W - Manual (Page 49)

49 US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\080OTH.fm masterpage: Right
Oth
e
r Op
eratio
ns
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony equipment that is
compatible with the Control for HDMI
function via an HDMI cable, operation is
simplified.
To use the “BRAVIA” Sync function, be sure to
turn on the system and all connected equipment
after completed the HDMI connection.
Control for HDMI - Easy
Setting
You can set the system’s [Control for
HDMI] function automatically by enabling
the corresponding setting on the TV.
For details about the Control for HDMI
function, see “[HDMI Settings]” (page 64)
System Power Off
You can turn the system off in sync with the
TV.
The system does not turn off automatically while
playing music or when “FM” function is selected.
One-Touch Play
When you press N on the remote control,
the system and TV turn on, and the TV’s
input is switched to the HDMI input which
the system is connected.
System Audio Control
You can enjoy the sound from TV or other
equipment by a simple operation.
You can use the System Audio Control
function as follows:
• When the system is turned on, the sound
of the TV or other equipment can be
output from the speakers of the system.
• When sound from the TV or other
equipment is output via the speakers of
the system, you can switch the sound to
output from the TV speakers by pressing
SPEAKERS TV
yAUDIO.
• When sound from the TV or other
equipment is output via the speakers of
the system, you can adjust the volume
and turn off the sound of the system by
operating the TV.
Audio Return Channel
You can enjoy TV sound via the system by
using just one HDMI cable. For details of
the setting, see “[Audio Return Channel]”
(page 64).
Language Follow
When you change the language for the
on-screen display of the TV, the system’s
on-screen display language is also changed
after turning off and on the system.
Routing Control
When you perform One-Touch Play on the
connected equipment, the system turns on
and sets the system’s function to “HDMI1”
or “HDMI2” (depending on the HDMI
input jack in use), and your TV’s input is
automatically set to the HDMI input to
which the system is connected.
Other Operations
Note
Note