Sony BDV-N8100W - Manual (Page 51)

51 US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\080OTH.fm masterpage: Right
Oth
e
r Op
eratio
ns
You can change the unit of measurement (feet or
meters) by pressing the color button (RED).
Setting the Speakers
[Speaker Settings]
To obtain optimum surround sound, set the
speakers’ distance from your listening
position. Then use the test tone to adjust the
balance of the speakers.
1
Press HOME.
The home menu appears on the TV
screen.
2
Press B/b to select [Setup].
3
Press V/v to select [Audio
Settings], then press .
4
Press V/v to select [Speaker
Settings], then press .
The [Select speaker layout.] display
appears.
5
Press V/v to select setting
according to your speakers
placement, then press
.
• [Standard]: The surround speakers
are installed in the rear position.
• [All Front]: All speakers are installed
in the front position.
All settings are reset to default settings each
time you change the speaker layout setting.
6
Press V/v to select the item, then
press .
7
Press V/v to adjust the
parameter.
8
Press B/b and to confirm the
settings.
Check the following settings.
x [Distance]
When you move the speakers, be sure to set
the parameters of the distance from the
listening position to the speakers.
You can set the parameters from 0 to
23 feet (0.0 to 7.0 meters).
[Front Left/Right] 10 ft/3.0 m: Set the front
speaker distance.
[Center] 10 ft/3.0 m: Set the center speaker
distance.
[Surround Left/Right] 10 ft/3.0 m: Set the
surround speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the subwoofer
distance.
You can change the unit of measurement (feet or
meters) by pressing the color button (RED).
x [Level]
You can adjust the sound level of the
speakers. You can set the parameters from
–6.0 dB to +6.0 dB. Be sure to set [Test
Tone] to [On] for easy adjustment.
[Front Left/Right] 0.0 dB: Set the front
speaker level.
[Center] 0.0 dB: Set the center speaker
level.
[Surround Left/Right] 0.0 dB: Set the
surround speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer
level.
Tip
Note
Tip