Sony CCD-TRV98 - Manual (Page 68)

68
Maintenance information
Cleaning the video head
To ensure normal recording and clear pictures, clean the video heads. The video head
may be dirty when:
• The x indicator and “
CLEANING CASSETTE” message appear one after another
or the x indicator flashes on the screen.
• Playback pictures contain noise.
• Playback pictures are hardly visible.
• Playback pictures do not appear.
If this happens, clean the video heads with the Sony V8-25CLD cleaning cassette
(optional).
[a] Slightly dirty
[b] Very dirty
Note on video heads
When the playback pictures still contain noise even if you have cleaned the video heads
with a cleaning cassette, the video heads may have worn down due to long use. If this is
the case, they must be replaced with new heads. Contact your Sony dealer or local
authorized Sony service facility.
About care and storage of the lens
• Wipe the surface of the lens clean with a soft cloth in the following instances:
– When there are fingerprints on the lens surface
– In hot or humid locations
– When the lens is used in environments susceptible to salt such as the seaside
• Store the lens in a well-ventilated location subject to little dirt or dust.
To prevent mold from occurring, periodically perform the above.
We recommend turning on and operating your camcorder about once per month to
keep your camcorder in an optimum state for a long time.
Cleaning the LCD screen
If fingerprints or dust make the LCD screen dirty, we recommend using a LCD
Cleaning Kit (optional) to clean the LCD screen.
Maintenance information and precautions
[a] [b]