Alpine DVA-9861Ri - Manual (Page 38)

37
-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
Setting the Speakers
1
Check that Defeat mode is off (page 25).
2
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
3
Select the SP SELECT mode by pressing TA
repeatedly.
4
Press MODE to select the speaker.
5
Select any kind of speaker or set speaker to ON/OFF
by turning the Rotary encoder.
6
Repeat steps 4 and 5 to set all the speakers.
7
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 41).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
Check that Defeat mode is off (page 25).
2
Press and hold TA for at least 2 seconds.
The MX mode of the audio processor control mode is
activated.
3
Select ON/OFF of MX by pressing or .
If ON is selected, press MODE.
4
After setting to ON, select the desired MX level by
turning the Rotary encoder.
• Music source (such as radio broadcasts and CDs, excluding MW, LW
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used to
reproduce the sound cleanly by making use of the data quantity.
MX COMPRESS MEDIA (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of compression.
This reproduces a well-balanced sound close to the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and produces
well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds
to the media connected.
5
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• There is no MX mode for MW, LW radio.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD.
X-OVER Adjustment
1
Check that Defeat mode is off (page 25).
2
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
3
Select the X-OVER mode by pressing TA repeatedly.
4
Select L+R or L/R by pressing and holding BAND for
at least 2 seconds.
5
Select the desired channel by pressing or ,
then press MODE.
When L+R is selected :
FRONT 1
FRONT 2 REAR CENTER SUBWOOFER
FRONT 1
When L/R is selected :
FRONT 1L
FRONT 1R FRONT 2L FRONT 2R
REAR L REAR R CENTER SUBWOOFER
FRONT 1L
• The speakers display differs, depending on the connected speakers.
FRONT1: OFF/TW (Tweeter)/FULL (Full Range)
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
(DVD MUSIC)
This disk contains a large quantity of data such as music clip. MX
uses this data to reproduce the sound accurately.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
01GB00DVA9861Ri.book Page 37 Wednesday, December 7, 2005 12:00 PM