Sony NW-E75 - Manual (Page 29)

29
Adjusting the settings of your Network Walkman
Switching to the
manual mode
1
Press the MENU button.
The menu screen is displayed.
2
Rotate the Shuttle switch to select
“VOL: SET.”
V O L : S E T >
3
Press the Nx button to confirm.
“SET >” blinks.
4
Rotate the Shuttle switch to select
“MAN.”
V O L : M A N
5
Press the Nx button to confirm.
6
Press the MENU button.
The display returns to the normal screen.
With this setting, you can adjust the
volume level by pressing the volume
button.
3
Press the Nx button to confirm.
“MAN” blinks.
4
Rotate the Shuttle switch to select
“SET >.”
V O L : S E T >
5
Press the Nx button to confirm.
“VOL LO xx”* blinks.
* “xx” stands for numeric values of the
volume level.
V O L L O x x
6
Set volume levels of three preset
levels: LO, MID, or HI.
1 Press the VOLUME +/– button to set
the volume level of the LO preset.
2 Rotate the Shuttle switch to select
“VOL MID xx,” and then press the
VOLUME +/– button to set the
volume level of the MID preset.
3 Rotate the Shuttle switch to select
“VOL HI xx,” and then press the
VOLUME +/– button to set the
volume level of the HI preset.
7
Press the Nx button to confirm.
8
Press the MENU button.
The display returns to the normal screen.
With these settings, you can adjust the
volume level to any of three preset
levels: LO, MID, or HI.
To cancel the menu mode
Select [RETURN] in the menu screen or press the
MENU button.
Note
If AVLS (page 27) is set, the actual volume may be
lower than the settings.