AT&T 905 User Manual

Page 6

Advertising
background image

IN CASE OF DIFFICULTY

If this telephone does not work
properly, try the following
suggestions before seeking repair
assistance.

No Dial Tone

Make sure all plugs are connected

properly. Inspect the line cord
connections at the modular jack
and at the telephone. Also inspect
the coiled handset cord connection
at both ends.

Unplug the telephone and connect

it to another modular jack. If it
still does not work, and other
telephones in your home are
working, the problem is with this
telephone.

Call Cannot Be Dialed Or Is
Dialed Slowly

Reset the Dial Mode switch. Make

sure you choose the correct dialing
method; touch tone dialing will
not work if you have dial pulse
(rotary) service.

See “Installation” to select the

correct dial mode. If you have
pulse dialing service, you cannot
dial numbers with the telephone
set in the touch-tone mode.

If you just used Temporary Tone,

leave the handset on the base for
a few seconds before making
another call.

Telephone Does Not Ring

Make sure the RINGER switch is

set in the LO or HI position.

If there are several other

telephones on the same line, try
disconnecting some of the other
telephones. Having too many
telephones connected can also
create problems such as low ringer
volume, or impaired sound quality
during calls.

Difficulty Storing Numbers In
Memory

Review “One-Touch Dialing” and

“Speed Dialing” to make sure you
are pressing the correct sequence
of buttons.

If you are interrupted by a

recorded announcement telling
you to hang up (or a loud buzzing
noise), hang up and try to enter the
number more quickly.

Try calling the number you want

to store into memory. When a call
is ended, press

,

and a memory button (or press

and a memory location

1-9).

If someone lifts an extension

phone while you are storing
numbers in memory, programming
might be interrupted. Make sure
all extensions are on hook while
storing numbers in memory.

You might not hear the

confirmation beep if the
RECEIVER (handset) volume is
set too low, or if you are in a noisy
location.

If the number is more than 24

digits long, make sure you follow
the directions for “Dialing Long
Numbers.”

Other Problems
Make sure you have followed all
the instructions in this booklet. If
you continue to have problems,
call 1 800 222-3111.

MEMORY

REDIAL

PROGRAM

5

Advertising