Leave word calling, Priority calling, Send all calls – AT&T DEFINITY 8102 User Manual

Page 4: Transfer, At&t

Advertising
background image

3

Dial call 2 (or another feature)

Note: If you hang up, call 1 sends a 3-burst priority
ring.

To put call 2 on hold and return to call 1

1

Press [ FLASH ] [recall dial tone]

2

Dial Hold code

Call 2 is put on hold, and call 1 is reconnected

SEND ALL CALLS

[ ]

Note: If you hang up, call 2 sends a 3-burst priority
ring.

To complete call 2 and return to call 1

1 After party on call 2 hangs up, hang up, receive

3-burst priority ring, and lift handset.

LEAVE WORD CALLING

[ ]

To leave a message after dialing an extension
(when your call is not answered), you hear
coverage or busy tone, or you have been put on
hold

1 Press [ FLASH ] [recall dial tone]

2 Dial Leave Word Calling code

[confirmation tone]

Message light goes on at called telephone

Note: If reorder tone is heard, message is not
stored; try again.

2

To leave a message without ringing an extension

1

Dial Leave Word Calling code

[dial tone]

2

Dial the extension [confirmation tone]

Message light goes on at called telephone

3

To cancel a Leave Word Calling message

Note: You cannot cancel a message left for an AUDIX
subscriber.

1 Dial Leave Word Calling Cancel code

[dial tone]

AT&T

2 Dial extension [confirmation tone]

Note: If reorder tone is heard, message is not
deleted; try again.

PRIORITY CALLING

[ ]

To place a priority call

1

Dial Priority Calling code

[dial tone]

2

Dial extension

To send all incoming calls (except priority calls)
immediately to coverage

1 Dial Send All Calls code

[confirmation tone]

2 Hang up

To cancel Send All Calls

1 Dial Send All Calls Cancel code

[confirmation tone]

Your calls will ring at your own telephone again

TRANSFER

[

]

To send present call to another extension or
outside number

1 Press [ FLASH ] [recall dial tone]

Present call is put on hold

Dial number that call is to be transferred to
[ringback tone]

Remain on line and announce call; if number
dialed is busy or not answered, press [ FLASH ]
twice to return to held call

Hang up

Transfer is completed

Prepared by
AT&T GBCS Product Documentation
Development

©1993 AT&T

Middletown, NJ 07748-1998

All Rights Reserved

Issue 1, December 1993

Printed in USA

7

8

Advertising
This manual is related to the following products: