Sony SLV-D570H - Manual (Page 35)

A
d
v
a
nc
ed Ho
okup
s
35 US A/V Receiver hookup
A Connecting to audio L/R jacks
This connection uses a stereo amplifier’s (receiver’s) two front speakers for sound.
You can enjoy the surround function that creates virtual speakers from two stereo
speakers. Select from “Surround1”, “Surround2” or “Surround3” of the surround
effects (page 82).
B Connecting to a digital audio input jack
Use this connection if your AV amplifier (receiver) has a Dolby* 1 Digital or DTS* 2
decoder and a digital input jack. You can enjoy the surround effect of Dolby Digital
(5.1ch) or DTS (5.1ch).
* 1 Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
* 2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Notes
• After you have completed the connection using DIGITAL AUDIO OUT (COAXIAL)/HDMI
OUT, be sure to set “Dolby Digital” to “Dolby Digital” and “DTS” to “On” in “AUDIO
SETUP” menu (page 59). Otherwise, no sound or a loud noise will come from the speakers.
• When you connect the player to an AV amplifier (receiver) using an HDMI cord, you will
need to do one of the following:
– Connect the AV amplifier (receiver) to the TV with the HDMI cord.
– Connect the player to the TV with a video cord other than HDMI cord (component video
cord, S VIDEO cord, or audio/video cord).
• When connecting to the HDMI OUT jack, carefully align the HDMI connector with the jack.
Do not bend or apply pressure to the HDMI cord.