Movies, Still images – Sony DCR-DVD910 User Manual
Page 35
35
R
e
co
rdi
ng/
Pl
ayb
a
ck
1
Turn the POWER switch
A
until
the
(Movie) lamp lights up.
2
Press START/STOP B (or C).
To stop recording, press START/STOP
again.
1
Turn the POWER switch A until
the
(Still) lamp lights up.
2
Press PHOTO F lightly to adjust
the focus A (a beep sounds), then
press it fully B (a shutter click
sounds).
appears next to
. When
disappears, the image has been
recorded.
b
Notes
• You cannot record still images on a disc.
z
Tips
• See page 12 for the recordable time of movies, and page 78 for the number of recordable still images.
• You can record still images by pressing PHOTO F during movie recording (Dual Rec, p. 37).
•
appears when [
INDEX SET] is set to [ON] (the default setting) during movie recording (p. 77).
• A frame is shown on the detected face, and the detected face image is sharpened automatically when
[FACE DETECTION] is set to [ON] (
) (the default setting) (p. 77).
• You can switch recording between movies and still images by touching
(HOME) D (or E)
t
(CAMERA)
t [MOVIE] or [PHOTO].
• You can create still images from recorded movies (p. 50).
Movies
[STBY]
t
[REC]
Still Images
Flashing
t
Lights up
Continued
,