Sony HDR-CX7 - Manual (Page 31)

31
E
n
jo
yi
ng w
ith
a com
p
ut
e
r
Recommended USB cable connection
To assure the proper functioning of your
camcorder, connect your camcorder to a
computer as below.
• Connect the USB ports of the Handycam Station
and a computer using the USB cable. Do not
connect anything to other USB ports of a
computer.
• When connecting to a computer with a USB
keyboard and USB mouse connected as standard
equipment, connect the Handycam Station to
another USB port using the USB cable.
b Notes
• Operations are not guaranteed when multiple
USB devices are connected to a computer.
• Be sure to connect the USB cable to a USB port.
If the USB cable is connected to a computer via
a USB keyboard or USB hub, operations are not
guaranteed.
To disconnect the USB cable
1 Click the [Unplug or eject hardware] icon
on the task tray on the bottom right of the
desk top.
2 Click [Safely remove USB Mass Storage
Device].
3 Click [OK] (Windows 2000 only).
4 Touch [END] on the screen of your
camcorder.
5 Touch [YES] on the screen of your
camcorder.
6 Disconnect the USB cable from the
Handycam Station and the computer.
b Notes
• Do not disconnect the USB cable while the
access lamp is lit.
• Before turning off your camcorder, disconnect
the USB cable following the proper procedures
described above.
• Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the “Memory Stick PRO Duo” may
not be updated correctly. Also, disconnecting
the USB cable improperly may cause a
malfunction of the “Memory Stick PRO Duo.”