Attaching the supplied accessories, To attach the lens hood, To attach the step down ring – Sony HDR-PJ790V User Manual
Page 47: Handycam" user guide
Search
Saving images with an external
device
Top page > Getting started > Checking the supplied items > Attaching the supplied accessories
Attaching the supplied accessories
To attach the lens hood
A:
Securing ring
Align the lens hood with the camcorder properly (
), then turn the securing ring of the lens hood in the
direction of the arrow (
).
When attaching the lens hood, align the opening section of the lens hood with the flash-emitting
section of the camcorder properly.
To remove the lens hood, turn the securing ring of the lens hood in the opposite direction from that of
the arrow.
Remove the lens hood when you record movies using the NightShot function. If you do not do so, the
shadow of the lens hood will be reflected and recorded in your movies.
Remove the lens hood when you operate the camcorder with the supplied remote commander.
To attach the Step Down Ring
Align the Step Down Ring with the camcorder properly (
), then turn it in the direction of the arrow until
the Step Down Ring is locked in place (
).
You can change the filter diameter to 37 mm (1 1/2 in.) by attaching the Step Down Ring, allowing
you to use the recommended conversion lens.
You cannot attach the wide end conversion lens/filter, if the Step Down Ring is attached.
38