Sony PCV-E518DS - Manual (Page 39)

Removing, Installing, and Replacing Components 31
Removing an Add-in Card
1 Remove the left side panel (see “Removing the Left Side Panel” on
page 24).
2
Remove the bottom panel (see “Removing the Bottom Panel” on
page 25).
3
Disconnect any cables attached to the add-in card.
4
Remove the screw that secures the add-in card to the chassis.
5
Remove the add-in card from the PCI slot connector and store the
card in an anti-static wrapper for future use.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
✍
Grasp the card with one hand on each end, and gently pull up as you rock the card
from side to side.
KY0071.VSD