Sony DVP-NS9100ES - Manual (Page 83)

83
Settings
and Adjus
tments
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume of the speakers to the same
level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
26).
You can create two different Speaker Setup
settings, one for Super Audio CDs and one for
all other types of discs. When you use the
i.LINK connection, it is not available.
1
Follow steps 1 through 4 of “Using
the Setup Display” (page 75) to
select “SPEAKER SETUP” in the
Setup display.
2
Select “DVD” or “SUPER AUDIO
CD” using X/x, then press ENTER.
Example: when “DVD” is selected.
3
Set the following items in the
order that they are explained
below.
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that
only the “SIZE” setting does not return to the
default setting.
◆ SIZE
Selects the size of the speakers.
• FRONT
• CENTER
• REAR
SPEAKER SETUP
SUPER AUDIO CD:
DVD:
SPEAKER SETUP (DVD)
DISTANCE:
LEVEL(FRONT)
:
LEVEL(REAR) :
OFF TEST TONE:
FRONT:
CENTER:
YES
LARGE
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit press ENTER
SETUP DISPLAY
SIZE:
LARGE Normally select this position.
SMALL Select this when the speaker
cannot reproduce adequate bass
frequencies.
LARGE Normally select this position.
SMALL Select this when the speaker
cannot reproduce adequate bass
frequencies.
NONE Select this if you do not connect
a center speaker.
LARGE Normally select this position.
Select according to the rear
speakers position.
SMALL Select this when the sound
distorts or the surround effects
are difficult to hear.
Select according to the rear
speaker position.
NONE Select this if you do not connect
rear speakers.
c continued