Sony DCR-TRV70 - Manual (Page 171)

171
Using the Network function
– DCR-TRV70 only
You can access the Internet using a USB device that complies with your camcorder.
Once the access is made, you can view a Web page, send/receive your e-mail, etc. This
section describes only how to open the network menu.
The POWER switch should be set to .
Operate by touching the panel with the stylus.
Press NETWORK.
The network menu appears.
For details, refer to the Network Function/Application Operating Instructions supplied
with your camcorder.
Note
•Make sure that your camcorder is in standby with the POWER switch set to
MEMORY/NETWORK.
•Do not remove the power source while operating the network functions or your
network settings may be erased. Also, close the network function before you turn the
POWER switch.
On trademarks
All product names mentioned herein may be the trademarks or registered trademarks
of their respective companies. Furthermore, “
TM ” and “®” are not mentioned in each
case in this manual.
How to hold your camcorder when operating network functions
Hold your camcorder with your hand through the grip belt to keep from dropping it.
The operation buttons needed for network functions are displayed on the LCD screen.
Press the buttons with the supplied stylus.
After using the stylus
Put it back in the stylus holder. Hold the stylus correctly as illustrated and insert it until
it clicks.
— Using the Network function —
Accessing the network