Sony DCR-HC26 - Manual (Page 57)

57
DCR-HC26
2-659-811-11(1)
Us
in
g a Com
put
er
E:\SONY\2659811111\01US06COM.fm
• When you connect your camcorder to a
Macintosh computer using a USB cable, you
cannot copy pictures recorded on a tape to the
computer. To copy recordings from a tape,
connect your camcorder to the computer with an
i.LINK cable and use the standard software in
the OS.
Installing the
software and “First
Step Guide” on a
computer
You need to install the software etc., with
the supplied CD-ROM on your computer
before connecting your camcorder
and your computer. Once installed, no
further installation will be necessary. The
software to be used varies depending on the
computer’s operating system you are using.
Windows computer: Picture Package
(including ImageMixer VCD2)
Macintosh computer: ImageMixer VCD2
For the details on the software, refer to
“First Step Guide.”
Log on as Administrators for installation
for Windows 2000/Windows XP.
1
Confirm that your camcorder is
not connected to the computer.
2
Turn on the computer.
Close all applications running on the
computer before installing the software.
3
Place the supplied CD-ROM in the
disc drive of your computer.
The installation screen appears.
The software version of Picture Package
is displayed as “1.5.”
Installing on a Windows
computer
Continued ,