Sony HDPS-M10 - Manual (Page 40)

40
Hints
If the above procedures are not followed, the hard disk remaining capacity
displayed on the unit's LCD display may not be as expected.
• If the Recycle Bin or trash is not emptied, the file or folder will still exist
inside the hard disk. Therefore, the remaining hard disk capacity shown on
the unit's LCD display will be the same as shown before deletion.
• If the unit is disconnected from the computer before the deletion process is
completed, the remaining hard disk capacity shown on the unit's LCD
display may be wrong.
To recover from this condition, connect the unit to a computer running
Windows XP and perform Check Disk.
Check Disk procedures for Windows XP
1
On the [Start] menu, click [My Computer]. Right-click on the
internal hard disk and select [Properties].
2
Click on the [Tools] tab.
3
Click the [Check Now] button under “Error-checking”, select
[Automatically fix file system errors] and click [Start].
4
Copy any file into the internal hard disk using the computer.
This will correct any file system errors created when the device was
improperly disconnected.