Sony DCR-PC109 - Manual (Page 85)

U
si
n
g t
h
e
M
e
nu
Using the Menu 85
b Notes
• You can play back a dual sound track cassette on this camcorder. However, you cannot
record a dual sound track on this camcorder.
• The setting returns to [STEREO] when you disconnect the power source from your
camcorder for more than 5 minutes.
AUDIO MIX
You can adjust the audio balance between the originally recorded sound (ST1)
and sound added afterwards (ST2) on the tape (p. 107).
b Notes
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
LCD/VF SET
The recorded picture will not be affected by this setting.
LCD BRIGHT
See page 21 for details.
LCD BL LEVEL
You can adjust the brightness of the LCD screen’s backlight.
b Notes
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
LCD COLOR
Touch / to adjust the color on the LCD screen.
VF B.LIGHT
You can adjust the brightness of the viewfinder.
G NORMAL Standard brightness.
BRIGHT Select to brighten the LCD screen.
G NORMAL Standard brightness.
BRIGHT To brighten the viewfinder screen.
Low intensity High intensity
, continued