AT&T 1856 - Manual (Page 5)


Installation options
3. Rotate the bracket to the wall installation position. Plug one end of the
telephone line cord into the jack of the telephone base. Place the telephone
line cord through one channel on the bracket. Bundle the telephone line cord
and place it inside the bracket. Place the other end of the telephone line cord
through the other channel on the bracket.
. I nsert the tabs of the bracket into slots and on the telephone base, then
press the other bracket tabs into slots and as shown below.
5. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug
the other end of the telephone line cord into a telephone wall jack. To mount the
telephone on the wall, position the mounting holes and over the telephone
outlet mounting studs. Press and slide the bracket down firmly so the telephone is
held securely on the telephone outlet mounting studs.
Tabletop installation
To return the bracket from the wall installation to tabletop position, follow the
directions below.
. Remove the telephone base from the wall. Unplug the cords from the wall
jacks. Remove the bracket from the telephone base. Remove the telephone line
cord from the channels. Untie the bundled telephone line cord.
Place the bundled telephone
line cord inside the bracket.