Sony PEG-N610C - Manual (Page 129)

Chapter3 Exchanging and updating data using a HotSync ® operation
129
Advanced HotSync ® operations
3 If you want to use a calling card to place the call, select the “Use
calling card” check box and enter the calling card number.
Note
If you plan to connect to your company’s dial-in server (network modem) instead
of connecting to a computer modem, see “Conducting a HotSync operation via a
network” on page 131.
6
Tap OK.
The HotSync screen is displayed again.
To select the conduits for a modem HotSync operation
The Conduit Setup dialog box on your CLIE handheld enables you to define
which files and/or applications synchronize during a modem HotSync
operation. You can use these settings to minimize the time required to
synchronize your data when using a modem.
To change the Conduit Setup for a modem HotSync operation:
1
Rotate the Jog Dial navigator to select HotSync and then press
the Jog Dial navigator. Or tap the HotSync
icon on the
Application Launcher screen.
The HotSync screen appears.
2
Tap the Menu icon.
3
Tap Options, and then tap Conduit Setup.
The Conduit Setup screen is displayed.