Sony BDP-S5000ES - Manual (Page 48)

48
Sets the color setting for video signals output
from the HDMI OUT jack. Select the setting
that matches the connected TV type.
Sets the Deep Color (color depth) setting for
video signals output from the HDMI OUT
jack.
The color depth is indicated by the number of
bits, and more colors can be reproduced as
the value increases. The player supports a
color depth of up to 12 bits. Connecting the
player and a TV that supports Deep Color
allows more accurate color reproduction than
when connecting it to a TV that does not
support Deep Color.
Sets whether to use the Super Bit Mapping
(only for video signals output from the HDMI
OUT jack).
Sets whether to send xvYCC information to
the connected TV.
Combining xvYCC-compatible video with a
TV that supports x.v.Color display makes it
possible to more accurately reproduce object
colors present in the natural world.
Sets the picture mode for DVD playback
pause status. For BD-ROMs or discs
containing AVCHD files, “Pause Mode”
automatically switches to “Auto.”
If the video coaxial cable used to connect the
COMPONENT VIDEO OUT jacks of the
player and your TV is too long, 1080i/720p
signals are weakened during transmission
over the cable (high frequency transmission
cable loss). This function compensates for
such high frequency transmission cable loss.
YCbCr/RGB (HDMI)
Auto Automatically detects the
connected TV type, and
switches to the matching
color setting.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB (16-235) Select this when connecting
to a device that only
supports RGB limited range.
RGB (0-255) Select this when connecting
to an RGB (0-255) device.
HDMI Deep Color Output
Auto Normally select this.
12bit Outputs 12bit video signals.
10bit Outputs 10bit video signals.
Off Select this when the picture
is unstable or colors appear
unnatural.
SBM
On Smooths reproduction of the
video signal. Normally
select this.
Off Turns off the function.
x.v.Color Output
Auto Normally select this.
Off Select this when the picture
is unstable or colors appear
unnatural.
Pause Mode
Auto Normally select this.
Dynamic moving pictures
appear without blurring.
Frame Displays static pictures at
high resolution.
Component output
compensation
Off Turns off the function.
1 ~ 7 Select the appropriate
numeric value depending on
the length of the connected
coaxial cable.
The compensation amount
increases by approximately
0.4 dB (at 30 MHz) for each
step increase.