Audiovox FR-1438-2 - Manual (Page 3)

Model FR1438-2 DISPLAY
1. RSSI Indicator: Receive signal strength indicator.
2. TX: Icon blinks during transmission.
3. Monitor Indicator: Icon appears when the monitor button is pressed.
4. Coded Tone Controlled Squelch System (CTCSS) Indicator: Icon appears
when receiving a transmission with correct CTCSS tone.
5. Auto Scan Indicator: Icon appears when the auto scan channel mode is
activated.
6. Dual Watch Scan Indicator: Blinks in dual watch scan mode or when the dual
watch scan mode is activated.
7. Voice Activated Transmission (VOX) Indicator: Blinks in the VOX selection
mode or appears when VOX is activated.
8. Key Lock Indicator: Blinks in autolock selection mode or appears when the
key lock is activated.
9. Call Indicator: This icon blinks in call selection mode and appears when the
unit is transmitting the call tone.
10. Battery Level Indicator: Icon indicates the battery charge strength.
11. Power Saver Indicator: Icon blinks to indicate the power saver is activated.
The rate at which the icon blinks varies with the power saving ratio. Fast
blinking indicates a lower power saving while slow blinking indicates a higher
power saving ratio.
12. TX Indicator: Icon appears when a signal is being transmitted.
13. RX Indicator: Icon appears when a signal is being received.
14. Large Segment Display: Indicates the channel number in use in normal mode.
When the Function Button is pressed, the FR1438-2 menu is displayed in
sequence.
3
3 10, 11 9
12
6 8 7 5 1, 2 4
13
14 15