Sony VPL-VW600ES - Manual (Page 32)

32
Setup Menu
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Setting items Description
Status Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain menus,
message when turning off the power, and warning messages.
Language Selects the language used in the menu and on-screen displays. Available
languages are: English, Dutch, French, Italian, German, Spanish,
Portuguese, Russian, Swedish, Norwegian, Japanese, Chinese
(Simplified Chinese), Chinese (Traditional Chinese), Korean, Thai, and
Arabic.
Menu Position You can change the position to display the menu on the screen.
Bottom Left: Displays the menu on the bottom left area of the screen.
Center: Displays the menu on the center of the screen.
Cooling Setting Sets the unit to operate at the prevailing atmospheric pressure.
High: Use this setting when using the unit at an altitude of 1,500 m
(approx. 4,900 ft) or higher.
Standard: Use this setting when using the unit at normal altitudes.
Tip
When this item is set to “High,” the fan noise becomes slightly louder
since the fan speed increases.
Remote Start Sets the Remote Start settings.
On: You can turn on the power from a PC or a terminal which is
connected to a network.
Off: Turns off the Remote Start function.
Tips
• To use the function, the unit should be connected to the network in
advance (page 39).
• To turn on the power with the Remote Start function, a special
command should be sent from a PC or a terminal. For details, consult
with qualified Sony personnel.
When the Remote Start is set to “On,” the standby power requirement
will increase.
Note