Sony DCR-TRV950 - Manual (Page 156)

156
Your camcorder can read moving picture data recorded on a tape and record it as a
moving picture on a “Memory Stick.” Your camcorder can also capture moving picture
data through the input connector and record it as a moving picture on a “Memory
Stick.”
Before operation
Insert a “Memory Stick” and the recorded tape into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. The picture recorded on the tape is played back.
And press X at the scene where you want to start recording from.
(3) Press START/STOP on your camcorder. The picture and sound are recorded
up to the remaining capacity of the “Memory Stick.” For more information
about recording time, see page 134.
To stop recording
Press START/STOP.
Recording pictures from a tape as a
moving picture
3
2
PLAY PAUSE
POWER
OFF(CHG)
CAMERA
MEMORY/
NETWORK
VCR
320
BBB
N 40min
REC 0:00:03
15min
0:15:42:43
FN INDEX PB
[a]: The recording time can be recorded on
the “Memory Stick.”
[b]: This indicator is displayed for
five seconds after pressing START/
STOP. This indicator is not recorded.
[a]
[b]