Send by transferjet, Cyber-shot user guide – Sony DSC-WX50 User Manual
Page 141
Search
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Send by TransferJet
Send by TransferJet
Receiving images using TransferJet
Using separately sold TransferJet-compatible devices
TransferJet is a close-up, wireless transfer technology that allows data to be transferred by closely
aligning two products that you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the
(TransferJet) mark on the bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred between
TransferJet-compatible devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with
TransferJet.
1. Insert a Memory Stick with TransferJet into the camera.
2. Press the
(Playback) button to switch to playback mode.
3. MENU
(Send by TransferJet)
desired mode
on the control wheel
4. Transfer images by closely aligning the (TransferJet) marks on the camera and other device.
A notification sound is emitted when connection is made.
(This Image)
Sends the currently displayed image in single-image mode.
(Multiple Images)
You can select and send multiple images.
After step
3, select an image to be sent, then press
.
To cancel the selection, press
again to cancel the
mark.
MENU
[OK]
Notes
Only still images can be transferred.
Up to 10 images can be transferred at once. However, for 3D images, both the MPO file and the
JPEG file are transferred. Depending on the receiving device, up to 20 images are received.
Set [TransferJet] to [On] in
On an airplane, set [TransferJet] to [Off] in
(Settings)
. In addition, follow the rules of
the place where you use.
The connection is cut if transfer cannot be made within about 30 seconds. If this happens, select
[Yes] and realign the two
(TransferJet) marks on the camera and another device.
The Memory Stick with TransferJet and camera models with TransferJet are not sold in some
countries and regions due to local laws and regulations.
Set the [TransferJet] function to [Off] in countries and regions other than where you purchased your
camera. Depending on the country or region, if you use the TransferJet function, you may be liable
due to local restrictions on transmission of electromagnetic waves.
Receiving images using TransferJet
1. Press the
(Playback) button to switch to playback mode.
2. Closely align the (TransferJet) marks on the camera and sending device to receive images.
A notification sound is emitted when connection is made.
Search