ARRI Laptop Camera Controller Arriflex LCC - Manual (Page 5)

Arriflex LCC Basics, 2/97, Page 5
4. The Timecode Window
24
Timecode button
Click here to close the Timecode Window
Timecode Window
Clicking the Timecode button will open up the Timecode window. Once opened, this window can be
closed by clicking in the square at the top left of the window.
Timecode Counters and Status
The current Timecode and Userbits will be shown. After the Timecode number, you will see either
NDF (non-drop frame) or DF (drop frame).
The TC Status will indicate if Timecode is on, off, or if an error condition exists.
The Buttons in the Timecode Window
On This button will turn Timecode on. This may take up to 4 seconds, so be patient.
Off This button will turn Timecode off. This may take up to 4 seconds.
Set TC/UB Clicking on this button will bring up a dialog box that allows the user to change
the Timecode and/or Userbits in the camera. Setting new Timecode with this
dialog box will automatically turn Timecode on.
Set TCS Only with the 435: the timecode sensitivity (TCS) number can be set.