NewAir AD-400 - Manual (Page 8)

PLEASE PLEASE PLEASE
PLEASE
NOTE: NOTE: NOTE:
NOTE:
1. Do not remove the float from the unit, as doing so will prevent the water
level sensor from correctly detecting the water level. Moreover, removing
the float may cause water leakage from the unit’s water tank.
2. If the drainage tank is dirty, rinse it with cold or lukewarm water. Do not
use detergent, scouring pads, chemically-treated dust cloths, gasoline,
benzene, paint thinner, or other solvents, as these can scratch and damage
the tank and cause water leakage.
3. When replacing the drainage tank back onto the unit, press the tank firmly
in place with both hands. If the tank is not positioned properly, the
“TANK FULL” sensor will be activated, and the dehumidifier will not
operate.
Continuous Continuous Continuous
Continuous
Water Water Water
Water
Drainage Drainage Drainage
Drainage
This dehumidifier features a continuous drainage port. To utilize this function, use
a plastic pipe with an inner diameter of 9 mm. The water in the drainage tank can
now be continuously drained out of the port on the unit.